I have been monitoring your site for a while now and have found it very informative. I do not know the first thing when it comes to diamonds except what I have read on your site. I am looking for a center stone, princess cut diamond for around $8000. I would like it to be from a 1.25ct to a 1.50ct for that price. I have a band already picked out. below is the attached link http://www.hydeparkjewelers.com/bridal-engagement-rings/engagement-ring-collection/tacori-rings.aspx I know it is not a great picture but it is the best one I can find online. The jeweler that is selling this states that the diamonds in the channel are of G color and VS1 clarity. I have been looking into a center stone from jamesallen.com because they seem to have more resonable prices than the place I am going to buy the setting from. If at all possible I would like the diamond to be of G color and VS1 clarity. but, I am not sure if I should get the same color and clarity for the center stone. Let me know what you think. Thanks!!!
Thanks for writing. I’m happy you found the site useful.
To address your concerns about matching, I’ve got a few things to say. Firstly, there’s no reason at all to match clarity. Clarity doesn’t affect how a diamond looks to your eye unless it’s very low quality and the inclusions are visible to the naked eye. The only things that affect how a stone looks are its size, color, and cut. You could have two 1ct I color princess cuts cut with similar proportions (ie, table and depth %) that are identical to the naked eye even though one is flawless and the other is an SI2.
Secondly, when it comes to matching diamonds of the same size, the two stones can easily be off by one color grade and you would never see the difference. Early on in my career I did a ton of matching for studs and other jewelry sets. THe rule was always that the stones in a pair or larger group can always vary by a color grade. When you’re talking about a large center stone matching with tiny pave stones on a setting, you could even go down 2 color grades and the difference wouldn’t be noticeable.
So having said all that, I would recommend you shoot for an H color stone. The largest jump in price between any two colors is between H and G. So why pay that nonsensical premium for a G color stone if an H Color stone will look the same? And as regard clarity, I always say you should buy the lowest clarity available that’s clean to the naked eye. Now in princess cuts, because of the type of rough that they generally come from, there aren’t a lot of stone available in the SI range. But lets see what I can find.
Here’s what I recommend:
https://www.jamesallen.com/diamonds/H-SI2-Ideal-Cut-Princess-Diamond-1277224.asp?a_aid=dmnd1357 – even though it’s an SI2, it looks like it will be eye clean. Huge stone for the price.
https://www.jamesallen.com/diamonds/H-SI1-Ideal-Cut-Princess-Diamond-1101656.asp?a_aid=dmnd1357 – stone has an amazing cut. It’s actually got a larger face (LxW) than the stone above due to its superior cut. I love this stone. THis is my primary recommendation.
https://www.jamesallen.com/diamonds/H-VS1-Ideal-Cut-Princess-Diamond-1294088.asp?a_aid=dmnd1357 – H VS1
https://www.jamesallen.com/diamonds/H-VS1-Ideal-Cut-Princess-Diamond-1294770.asp?a_aid=dmnd1357 – if you wanted to save some money, a great option
Have a look at these, and let me know what you think.
Thank you for the help and quick response. There is no way I would have found any of these diamonds and known all that without your help. I just have one other question for now before I make my decision. How does the polish and symmetry effect how the diamond looks. I see that your primary choice, which I love, only has a rating of good for both. All the inclusions on this diamond are not visibile to the naked eye, only under 10x magnification?
Take a look at my articles about polish and symmetry:
https://www.diamonds.pro/education/polish/
https://www.diamonds.pro/education/symmetry/
The only thing in that stone that might be visible is if you look closely just to the right of the top left corner you’ll see a black spot on the very edge of the stone. From the top down, you most likely would never notice this since it’s on the edge, but it’s possible this might be visible from the side since I have no way of knowing how tall the inclusion is. It might just be a black speck on top, but it might also be a vertical line that would easily be seen from the side. You can have JA’s customer service reps check out the stone for you if you’d like and they can tell you for certain whether or not it’s visible to the naked eye.
Let me know what you decide to do in the end!
Unfortunately, that 1.60ct ring is no longer available that that was also my main selection. I have begun to ask about the 1.72ct. The jeweler says its eye clean. They also stated that with all SI1 and SI2 diamonds, the inclusions could be seen from the side. is that true? I noticed on the SI2 diamond you picked out there are plenty of feathers and crystals and all that. Is this diamond worth purchasing if it is eye clean from the top down, but you can see inclusions from the side?
From the diamonds you have already picked out, what is your new recommendation since the first one is no longer available.
The 1.72ct stone is a hard one to judge because the picture isn’t so clear. But from what I can tell as it is, it looks like it will be eye clean.
It’s true that with princess cuts especially, you can see more SIs from the side, but this never bothered me, as nobody looks at a diamond set in a ring from the side. Diamonds are meant to be viewed top down, not from the side. This is how they’re cut, and this is how they’re displayed in the ring.
As far as my recommendation goes – I would say that if JA says that it is eye clean, then you should definitely go for it. It’s the largest of the 3 remaining suggestions, and if it’s eye clean, then it will be as brilliant and fiery as the others, just larger.
let me know what you decide to go with in the end!
……
Hey. Just wanted to follow up with you. Did you pick any of those stones I recommended or are you holding out for something else?
If not, I found another good alternative:
https://www.jamesallen.com/diamonds/H-VS2-Ideal-Cut-Princess-Diamond-1271983.asp?a_aid=dmnd1357 – it’s 1.51, but it’s just as large in LxW as the 1.72! And best of all, it’s $400 cheaper!
I was set on the 1.72ct diamond but have not purchased it yet. Then you sent me this new diamond and now I am second guessing. This 1.51ct is beautiful!
I have been busy lately so have not actually made the purchase. After looking at this diamond you sent to me today, I think I am going to end up purchasing that one instead. The cut is amazing to the naked eye and the larger face makes it look that much better.
I will let you know when I have purchased it, that is if it doesnt sell before then.
Thanks for the help and sending more recommendations!!!
I just noticed that the 1.51 is no longer available. Did you grab it?? I hope it’s because of you that it’s not available anymore!!!
nope, someone else grabbed it before i did.
Doe! The hunt continues….
Yes it does, well if you come across another diamond like the 1.51ct let me know. I would have bought it if i had somewhere to send it too. right now i am deployed and my parents live in new york and that is the only state that charges taxes if you ship it there. so im trying to find someone to ship it too in colorado where i will be going back too.
Wow. Where are you deployed? I’ve actually helped a few soldiers/contractors buy rings. A couple in Iraq and one in Afghanistan. Thank you for what you’re doing.
You could have it shipped to a fedex location in NJ, if your parents don’t mind going in to pick it up.
Let me know when you have that figured out, and then I’ll take another look so you don’t have to suffer another let down!
Yes, these let downs suck!!! I am deployed to Afghanistan right now. I think i may have someone to send it too, but I still have to work the details out. I will keep looking and it would be great help if you could too, that is if you dont mind. I really liked that 1.51ct, so if there is another one like that, I will def look at buying it.
My Pleasure! This one’s got an awesome cut, but it’s a bit expensive:
https://www.jamesallen.com/diamonds/H-VS2-Ideal-Cut-Princess-Diamond-1289140.asp?a_aid=dmnd1357
Can you hack that price, or do you need to keep it a little lower?
Stay safe!
i may need to keep it a bit lower, but i will keep it in reserve, well i should say until someone else buys it lol.
Ha! Let me know when you resolve the shipping issue and you’ve got your finger on the trigger. Then I’ll go back and find you some more options.
Ok, I have finally figured everything out and am ready and willing to pull the trigger.
Sure thing. Here’s a great option:
https://www.jamesallen.com/diamonds/H-VS1-Premium-Cut-Princess-Diamond-1260690.asp?a_aid=dmnd1357
It’s got an amazing cut. Don’t pay attention to the fact that JA gives it a “premium” cut. It’s rare to find a princess cut with a table under 70%. Also, it’s pretty much the same size as the others that I sent you that you liked.
I just wanted to let you know that I purchased the last diamond you sent to me. I just wanted to thank you for your help and quick responses. You are unbelieveable to work with and I am definately going to recommend you to everyone I know! Thank you again, you helped me out a lot.
It was my pleasure! I wish you and your fiance to be a long life together filled with health, happiness, and love!
Please let me know how the ring looks when you get it.
Before you buy a diamond, get personal buying advice from industry veterans. We'll help you get the best diamond for the money.
DISCLAIMER: We don't use your email for marketing. Period.
Please enter your email address to receive your 25% off coupon code:
Here is your coupon code: GFDSF3GF