We are reader-supported. Buying through any red colored link on our site may earn us commissions. Learn More.

Help Building a 3 Stone Emerald Cut Engagement Ring in the UK

By Mike Fried,

Apologies in advance for this extended question.

My girlfriend wants a three stone engagement ring made of emerald cut diamonds, a centre stone of approx 0.9 carat with the long edge of the stone running parallel with the finger, the two side stone set with the long edge set perpendicular to the main stone all in a rub over setting. Despite an extended tour of Hatton Garden jewellers we didn’t manage to see any rings of this design although I am quite happy to have it made. Regarding the above I have a number of questions.

I have seen 2 diamonds on Blue Nile suitable for the main diamond (both with a L/W of 1.5 as this is the ratio she wants). The first is;

0.9 carat
VG cut
I colour
VS1 clarity
6.85×4.55×3.08 size
£1909 ($2860) price

Second;
0.91 carat
VG cut
G colour
VS2 clarity
6.88×4.54×3.13 size
£2445 ($3680) price

The difference between the two is almost $1000, presumably down to the colour as the cheaper diamond has less inclusions. Would your average punter be able to tell the difference, is it ‘worth’ the extra money?

The two side diamonds will probably be about 0.25-0.3 carat each, any larger and I think the ring would be to broad. Is there any point getting certificated diamonds or should I just leave this to the jeweller to find a matching pair of the right size. I have looked on Blue Nile and James Allen but the smallest matching pair are about 0.5 carats each. I have seen two diamonds on Blue Nile that are very similar in specification (see below), just a very small difference in the dimension and level of polish (VG and excellent respectively) would these look like a matching pair?

0.24 carat
VG cut
G colour
VS1 clarity
4.13×3.13×2.15 size
£184 ($276) price

0.24 carat
VG cut
G colour
VS1 clarity
4.08×3.07×2.11 size
£196 ($294) price

Apologies in advance for this extended question.

Before I give you my full answer: will the ring be plat/white gold or yellow gold?

3-stone-ring-drawing

Platinum. Sorry one more thing, as I said previously the girlfreind wants a rub over setting (I attach a sketch I have drawn of the ring) as it wont catch on her clothes, she would prefer the sides to be fully enclosed. Does this effect the ‘sparkle’ or shine of the diamond being enclosed like this.

First of all, congratulations and thanks for writing! I really hope I can help you out. Unfortunately, with an emerald cut, you really do need to buy a diamond with a high clarity grade. Since the stone doesn’t have “brilliant” facets, but rather stepped facets, it’s very easy to see what’s floating around inside the diamond material. I did a quick run-through of James Allen’s inventory (since they have pictures) to see if any of the SI’s were decent. But since they were almost F colors anyway, none of them were really any cheaper than what you found. Especially considering the extra shipping fee and %1 commission they charge for international shipping.

Since the ring will be Platinum, I’m afraid I’d have to advise you to go with the “G” color stone. This is also due to the fact that it’s an emerald cut. Since there are no brilliant facets that break up the light, the color is much more easily seen. An I color will definitely have more of a “warm” feeling to it compared to a G color in an emerald cut.

I went on BN UK and checked the details of the stone in question, and it reads very nicely. The only thing that concerns me is that a VS2 can still be quite noticeable, especially in an Emerald cut. If you take a look at my site in the “Truth about Clarity” article, you can see a good example of this. And that’s a round cut! In any event, I would say go for it, and if the diamond has a black center inclusion, you can always return it within 30 days.

Regarding the side stones, in your drawing the side stones take up about 40% of the length of the center stone along each side. If you use the 1/4cts you picked out, they would take up about the same, so it should have the same balance as the drawing (6.88 length of center stone / 3.10 width of side stones). As for whether they match or not, I would need to see the rest of their parameters. Would you mind sending me the links to those 2 stones? One thing you might want to consider, though, is getting stones that are slightly lower in color (1, 2 grades max) than they center stone. It will make the center stone really pop out at you.

Unless your jeweler is a reliable wholesale type operation, you probably won’t save any money having him source the emeralds.

As far as the setting goes, a bezel setting (what you are calling “rub over”) won’t affect the diamonds beauty. But just keep in mind that emeralds don’t “sparkle” so much regardless of their setting. They’re not designed for sparkle.

I hope this helps! Please follow up with the side stone parameters.

A: Firstly thank you very much for taking so much time in your reply. This represent a sizable outlay for me and the advice is really appreciated. Interesting to know that the diamonds can be returned. I found the two quarter carat diamonds on BN UK. I have put the details of the diamonds below including the stock number. Hopefully this is enough for you to find them. If not there is an option to ‘email to a friend’ which i guess sends a link to the page.

Once again thank you for your help.

Stock number LD01147484
0.24 carat
VG cut
G colour
VS1 clarity
4.13×3.13×2.15 size
£184 price

Stock number LD01167987
0.24 carat
VG cut
G colour
VS1 clarity
4.08×3.07×2.11 size
£196 price

A: I checked the two diamonds, and their parameters match up quite nicely. Just fyi, I was double checking that their table % and depth % were a match as well. The depth % is exact, and the table is only off slightly (which is fine). As I’m sure you did, I checked to see if there were any small stones at slightly lower colors, but unfortunately there aren’t. This should make a beautiful ring! It’s a wonderful way to start off your lives together!

As I mention on my website, I never ask for any kind of payment from the people I advise. The only thing I ask — if you’ve found my advice helpful — is to click on an “affiliate link” of mine before you make your purchase. An affiliate link basically tells Blue Nile that I referred you to their website (it works for 30 days from the day of the “click”). I will then earn a 5% commission on the sale. You, of course, will still pay the exact same price. In fact, you’ll never notice any difference at all to your order.

Thanks again, and I really hope I was helpful!

Best Wishes for a Loving Happy Marriage! (We just celebrated our 10th anniversary this year!)

James Allen James Allen is the leader in online diamond sales. Their imaging technology is the same as inspecting a diamond with a jeweler's loupe. They have the largest exclusive loose diamond inventory online and fantastic prices. They also have the nicest collection of lab-created diamonds online. Get 25% off sitewide at James Allen
What we love about them:
  • No questions asked returns within 30 days of shipment. James Allen will send you a paid shipping label to return the ring.
  • Lifetime Warranty
  • Free International Shipping
  • Free prong tightening, repolishing, rhodium plating and cleaning every 6 months
  • Provide insurance appraisals
  • One free resizing within 60 days of purchase
  • Free ring inscriptions
  • Best-in-class high quality imagery of all diamonds in stock
  • 24/7 Customer Service
  • Best-in-class packaging
Arrow down
Arrow up
Blue Nile Blue Nile is the largest and most well known internet jewelry seller. They have a very large exclusive online inventory. Their high quality images are catching up to James Allens' and their prices are amazing.Save 25% on settings at Blue Nile!

Please enter your email address to receive your 25% off coupon code:

What we love about them:
  • No questions asked returns within 30 days of shipment. Blue Nile will send you a paid shipping label to return the ring.
  • Lifetime Warranty
  • Free Shipping
  • Free prong tightening, repolishing, rhodium plating and cleaning every 6 months
  • Provide insurance appraisal
  • One free resizing within the first year of purchase
  • High quality images of about half of their diamonds
  • 24/7 Customer Service
  • 100% credit towards future upgrades (must be at least double in value)
  • Best in class fulfillment
Arrow down
Arrow up

Still afraid of getting ripped off?

Before you buy a diamond, get personal buying advice from industry veterans. We'll help you get the best diamond for the money.

Ask your diamond purchase question here

  • Hidden
  • This field is for validation purposes and should be left unchanged.

DISCLAIMER: We don't use your email for marketing. Period.

Please enter your email address to receive your 25% off coupon code:

Here is your coupon code: GFDSF3GF